APC SMC1000, SMC1500 Product Description, Safety and General Information, Specifications

Product Description

The APC™ by Schneider Electric Smart-UPS™ is a high performance uninterruptible power supply (UPS). It provides protection for electronic equipment from AC power blackouts, brownouts, sags, and surges, small AC fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until AC power returns to safe levels or the batteries are fully discharged.

Safety and General Information

Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage.

Read the Safety Guide supplied with this unit before installing the UPS.

•This UPS is intended for indoor use only.

•Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.

•Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

•The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated ambient temperatures, poor quality AC power, and frequent short duration discharges will shorten battery life.

•Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

Specifications

For additional specifications, refer to the APC Web site at www.apc.com.

	Operating	0° to 40° C (32° to 104° F)
Temperature
	Storage	-15° to 45° C (5° to 113° F)
		charge UPS battery every six months
Maximum	Operating	3,000 m (10,000 ft)
Elevation
	Storage	15,000 m (50,000 ft)
Humidity	0% to 95% relative humidity,	0° to 40° C (32° to 104° F)
	non-condensing
Battery Type	Maintenance free, sealed lead acid

Smart-UPS C 1000/1500 VA 120/230 Vac Tower 1