29
Specifications
GENERAL
AC Line Voltage:
100V to 240V, auto-configuring
AC Line frequency:
50 Hz to 60 Hz, auto-configuring
Maximum AC Line Current Draw:
600 mA @ 100V
Thermal Operating Range:
0° C to 65° C
ANALOG INPUTS
Connector Type:
3-pin Phoenix (euro-style), detachable terminal block
Audio Resolution (Tx):
16, 20, 24-bit (software configurable)
Input Sensitivity:
+12 dBu, +18 dBu, +24 dBu, ±0.5 dB (via internal jumper selection)
Input Impedance:
>8k ohms (balanced) @ +12 dBu input sensitivity
>16k ohms (balanced) @ +18 dBu input sensitivity
>33k ohms (balanced) @ +24 dBu input sensitivity
Frequency Response:
20 Hz to 20 kHz, ±0.5 dB
Dynamic Range, typical:
108 dB FS @ 997 Hz
Dynamic Range, worst-case:
>106 dB FS @ 997 Hz
Signal-to-Noise (A-weighted):
110 dB FS (20 Hz to 20 kHz), typical
THD+N @ 997 Hz:
.001 %, typical
THD+N (20 Hz to 20 kHz):
<.006 %, worst-case
Inter-channel Isolation:
>85 dB separation
Common Mode Rejection:
>50 dB (20 Hz to 20 kHz)
AES3 INPUTS
Connector Type:
XLR, female
Audio Resolution:
20-bit with sample-rate-conversion
Sample Rate Support:
32 kHz, 44.1 kHz, 48 kHz
Input Impedance:
110 ohms (balanced), transformer coupled
Dynamic Range:
>120 dB FS(component datasheet spec.)
THD+N (20 Hz to 20 kHz):
>96 dB FS(component datasheet spec.)
ANALOG OUTPUTS
Connector Type:
3-pin Phoenix (euro-style), detachable terminal block
Audio Resolution (Rx):
16-, 20-, or 24-bit (auto-configuring)
Output Level:
+6 dBu
,
+12 dBu, +18 dBu, +24 dBu (via internal jumper selection)
Output Level Pad:
+1 dB @ 100k ohm load, typical <-.5 dB @ 600 ohm load
Maximum Load:
600 ohms minimum
Specifications Subject To Change Without Notice