5SURTA 1500XL/1500XLJ/2200XL Series 100/120 Vac Tower/Rack-Mount 2U

Specifications

Installation
Units may vary in appearance from those depicted in this manual.
Always place UPS above XLBPs in rack-mount configuration.
The unit is heavy. Remove the battery prior to installation.
Prior to connecting utility or battery power to the UPS connect the transient voltage
surge-suppression (TVSS) screw.

Rack-Mount and Stack Configurations

Refer to the installation guide supplied with the rail kit for rack-mount configuration instructions.

Tower Configuration

The UPS is shipped with stabilizer brackets installed. Do not remove the stabilizer brackets when
the UPS is to be operated in tower configuration. Removal of the stabilizer brackets for tower
configuration may result in personal injury or equipment damage.

External Battery Pack(s)

Refer to the user manual supplied with the external battery pack for installation instructions.
Temp era tur e Operating 0° to 40° C (32° to 104° F) This unit is intended for indoor use only.
Select a location sturdy enough to handle
the weight.
Do not operate UPS where there is
excessive dust or temperature or humidity
are outside specified limits.
This unit has side air vents. Allow
adequate space for proper ventilation.
Environmental factors impact battery life.
High temperatures, poor utility power, and
frequent, short duration discharges will
shorten battery life.
Storage -15° to 45° C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity 0% to 95% relative humidity, non-condensing