![](/images/new-backgrounds/1265415/265415179x1.webp)
Take Apart
Ferrite
Bead
Interconnect Board - 32
| 2 Pull out the locking tab |
| on connector J2 and |
| remove the display |
| cable. |
| Note: If you also plan to |
| remove the display or the |
| display cable, separate the |
| display cable ferrite bead |
| from the top case. You may |
| need to use a small flat- |
| blade screwdriver to pry |
| off the ferrite bead. |
J2 Connector | Replacement Note: Connect |
| the display cable before |
| replacing the interconnect |
| board. |