TroubleshootingSymptom Charts/Peripherals - 17
Peripherals
After connecting | 1 | Switch on external SCSI device before starting computer. |
external SCSI device, | 2 | Check cable connections. |
computer doesn’t boot | 3 | Verify that standard Apple terminator terminates end of SCSI |
| 4 | chain. |
| Verify that SCSI select switch setting on external device is | |
| 5 | unique. |
| Verify operation of internal hard drive. | |
| 6 | Try |
| 7 | Replace logic board. |
Cursor does not move | 1 | Press reset switch. |
when using trackball | 2 | Check interconnect board and logic board connections. |
| 3 | Replace interconnect board. |
| 4 | Replace logic board. |
