If you have the Software Update CD
Follow these steps:
1Type
lslpp
In most cases a message appears telling you that the0 software is not installed. Continue with step 2.
If a message appears telling you the software is present, then go to next section, “Installing the FDDI AIX Driver.”
2Insert the Network Server Software Update Kit CD in the CD drive.
3To mount the CD, type the following command and press return: mount
4At the AIX prompt, type the following command and press return: smitty devinst
The menu for installing additional device software appears.
5In the “INPUT device/directory for software” field, type:
/mnt/new
6In the “SOFTWARE to install” field, type: devices.mca.8ef4.com
7Press Return.
A dialog box appears asking you to confirm the installation. Press Return to begin the installation or press F3 (or ESC 3) to cancel the installation.
8To unmount the CD, type: umount /mnt
When the installation is finished, continue with the next section, “Installing the FDDI AIX Driver.”
Installing the Common FDDI Software A21
