This appendix contains instructions for installing a PDS card or communication card. To install a video input card or an external video connector card, follow the instructions that came with the card.

WARNING To avoid damaging your computer and expansion card, do not attempt to install any expansion card without first checking the documentation for that card. If the documentation specifies that an Apple-certified technician must install the card (usually because

the installation requires special training or tools), consult the service and support information that came with your computer for instructions on how to contact an Apple-authorized service provider or Apple for service. If you attempt to install the card yourself, any damage you cause to your computer will not be covered by the limited warranty on your computer. If the card is not an Apple-labeled product, check with an Apple-authorized dealer or service provider to see if you can install it yourself.

Installing any type of expansion card involves three steps:

mopening the computer

minserting the card into a particular slot

mclosing the computer

Opening the computer

1Choose Shut Down from the Special menu or press the Power key on the keyboard.

2Turn the computer completely off by pressing the power switch at the back of the computer.

Leave the computer plugged in. The plug grounds the computer and protects it from electrical damage while you are setting up.

3Unplug the cable that connects your keyboard to the computer.

4If there are security screws on either side of the computer’s back panel, remove them with a screwdriver.

88Appendix B

Page 96
Image 96
Apple LC 580 manual Opening the computer