Apple LL2507 manual 4Adding Memory To Your Computer, Installing Additional Memory

Models: LL2507

1 104
Download 104 pages 15.89 Kb
Page 53
Image 53

4Adding Memory

4

to Your Computer

This chapter provides information and instructions for installing additional memory in your PowerBook.

Warning: Apple recommends that you have an Apple-certified technician install memory. Consult the service and support information that came with your computer for instructions on how to contact Apple for service. If you attempt to install memory and damage your equipment, such damage is not covered by the limited warranty on your computer.

Installing Additional Memory

Your computer comes with two memory slots, one above the other, that you access from the bottom of the computer. Your computer comes with a minimum of 256 megabytes (MB) of Double Data Rate (DDR) Synchronous Dynamic Random-access Memory (SDRAM) installed in the lower slot. Both memory slots can accept an SDRAM module that meets the following specifications:

Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format

1.25 inch or smaller

256, 512 MB or 1 gigabyte (GB)

200-pin

PC2700 DDR 333 Type RAM

Depending on the configuration of the PowerBook you purchased, both memory slots may already be full.

The maximum amount of memory you can install in your PowerBook is 2 GB, using 1 GB DIMMs in both memory slots.

53

Page 53
Image 53
Apple LL2507 manual 4Adding Memory To Your Computer, Installing Additional Memory