Apple MB754LL/A, MD479LL/A manual To require a combination to change the maximum volume

Models: MD479LL/A MB754LL/A

1 80
Download 80 pages 24.81 Kb
Page 41
Image 41

To require a combination to change the maximum volume:

1After setting the maximum volume, use the Click Wheel to select Lock and then press the Center button.

2In the screen that appears, enter a combination. To enter a combination:

ÂUse the Click Wheel to select a number for the first position. Press the Center button to confirm your choice and move to the next position.

ÂUse the same method to set the remaining numbers of the combination. You can use the Next/Fast-forward button to move to the next position and the Previous/Rewind button to move to the previous position. Press the Center button in the final position to confirm the entire combination.

The volume of songs and other audio may vary depending on how the audio was recorded or encoded. See “Setting Songs to Play at the Same Volume Level” on page 42 for information about how to set a relative volume level in iTunes and on iPod nano. Volume level may also vary if you use different earphones or headphones. With the exception of the iPod Radio Remote, accessories that connect through the iPod Dock Connector don’t support volume limits.

If you set a combination, you must enter it before you can change or remove the maximum volume limit.

To change the maximum volume limit:

1Choose Settings > Playback > Volume Limit.

2If you set a combination, enter it by using the Click Wheel to select the numbers and pressing the Center button to confirm them.

3Use the Click Wheel to change the maximum volume limit.

4Press the Play/Pause button to accept the change.

To remove the maximum volume limit:

1If you’re currently listening to iPod nano, press Pause.

2Choose Settings > Playback > Volume Limit.

3If you set a combination, enter it by using the Click Wheel to select the numbers and pressing the Center button to confirm them.

4Use the Click Wheel to move the volume limit to the maximum level on the volume bar. This removes any restriction on volume.

5Press the Play/Pause button to accept the change.

If you forget the combination, you can restore iPod nano. See “Updating and Restoring iPod Software” on page 69.

Chapter 3 Listening to Music

41

Page 41
Image 41
Apple MB754LL/A, MD479LL/A manual To require a combination to change the maximum volume, To change the maximum volume limit