APW Wyott takes pride in the design and quality of our products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this manual carefully.
Installation and
If you have questions concerning the installation, operation, maintenance or service of this product, write Technical Service Department APW Wyott Foodservice Equipment Company, P.O. Box 1829, Cheyenne, WY 82003.
SAFETY PRECAUTIONS
Before installing and operating this equipment be sure everyone involved in its operation are fully trained and are aware of all precautions. Accidents and problems can result by a failure to follow fundamental rules and precautions.
The following words and symbols, found in this manual, alert you to hazards to the operator, service personnel or the equipment. The words are defined as follows:
! | DANGER: This symbol warns of imminent hazard which will result in serious injury or death. | ! |
|
|
|
! | WARNING: This symbol refers to a potential hazard or unsafe practice, which could result in | ! |
serious injury or death. | ||
|
|
|
| CAUTION: This symbol refers to a potential hazard or unsafe practice, which may result in minor or | ! |
! moderate injury or product or property damage. | ||
|
|
|
! | NOTICE: This symbol refers to information that needs special attention or must be fully understood | ! |
even though not dangerous. | ||
SAFETY INFORMATION
THIS MANUAL SHOULD BE RETAINED FOR FUTURE REFERENCE
CAUTION: These models are designed, built, and sold for commercial use. If these models are positioned so the general public can use the equipment make sure that cautions, warnings, and
! operating instructions are clearly posted near each unit so that anyone using the equipment will ! use it correctly and not injure themselves or harm the equipment.
! | WARNING: Check the data plate on this unit before installation. Connect the unit only to the voltage | ! |
and frequency listed on the data plate. Connect only to 1 or 3 phase as listed on the data plate. | ||
|
|
|
| WARNING: Electrical and grounding connections must comply with the applicable portions of the | ! |
! national electrical code and/or other local electrical codes. | ||
|
|
|
! | WARNING: Disconnect device from electrical power supply and place a Tag | ! |
power plug, indicating that you are working on the circuit. | ||
WARNING: Install per the spacing requirements listed in the installation section of this manual. We strongly recommend having a competent professional install the equipment. A licensed electrician
! should make the electrical connections and connect power to the unit. Local codes should always !
be used when connecting these units to electrical power. In the absence of local codes, use the latest version of the National Electrical Code.
WARNING: This device should be safely and adequately grounded in accordance with local codes, or in the absence of local codes, with the National Electrical code, ANSI/NFPA 70, Latest
! | Edition to protect the user from electrical shock. It requires a grounded system and a dedicated | ! |
circuit, protected by a fuse or circuit breaker of proper size and rating. Canadian installation must | ||
| comply with the Canadian Electrical Code, CSA C22.2, as applicable |
|
2
