APW Wyott SHFWEZ-2D Apw Ezfill Hot Food Wells, Installation, Options, Electrical Specifications

APW EZFILL HOT FOOD WELLS

Part Numbers Beginning with WHFW

D

	Drain												Soup Well
													Cut-out
											6.0 (15.2) Minimum
											From Counter Edge 2.0						nimum
																(5.1) Mi
															From Counter			Top
							E
				12.02
				(305)				1 Water
																		F
									Inlet
						10.69
						(27.1)
									A	610				G
												Control Cut-Out
										(155)
7.78
(198)
					C
		7.55						B
		(192)
							2
			4.19
			(10.6)

8.12

(20.6)

1.Water fill is 3/8 (1.0) tubing connection on left back of left controls.

2.Main drain is ¾ female NPT.

INSTALLATION

1. F o l l o w g e n e r a l i n s t a l l a t i o n instructions on page 3.

2.Make applicable Cut-Out per above table. Note: Unit is designed for installation in stainless steel tops. Optional wood mounting kit available.

3.Apply putty tape to the underside perimeter of the well rim outer edge.

4.Apply a 1/4" (.6) bead of silicone sealant adjacent to the putty tape on the well flange.

5.Drop well into opening from the top and push down until entire parameter of rim is flush with the counter surface.

6.From below the counter surface insert an 8" to 10" (20 to 25 cm) flat tip screwdriver into the locking ring tab slots and twist in a clockwise motion to lock well in place.

7.Trim excess putty and sealant from around well rim.

8.Mount control to front panel using hardware. Maintain 4" (10.2) clearance between well and front panel.

9.Check nameplate for proper voltage. Connect power.

10.Connect overflow tube on hot food well to suitable tubing to handle 212°F water. Run to open drain.

Note: Electrically connect units to comply with local and NEC codes.

GENERAL SPECIFICATIONS (APW EZFILL HOT FOOD WELLS)

MODEL	OUTSIDE DIMENSIONS			INSIDE DIMENSIONS	CUT-OUT	CONTROL CUT-OUT		SHIP WT.
	A	B	C	E	D	F	G
SM50EZ	10.34”	8.38”	6.44”	8.32”	10.875	5.0	12.5	13 Lbs.
WELL	(26.3)	(21.3)	(16.4)	(21.1)	(27.6)	(12.7)	(31.8)	(5.9 Kg)

OPTIONS

Description: Lever Operated Drain Valve

Stock Number: 56360

Drain Manifold: Fabricated to Unit, Required

ELECTRICAL SPECIFICATIONS

MODEL		ELECTRICAL RATINGS 500 EA. @ 208V / 660 EA. @ 240V
		VOLTS	WATTS	AMPS (1 Phase)		MAX AMPS (3 PHASE)
SM50EZ WELL		208/240	500/660	2.4/2.75		N/A
	NOTE: CUT-OUT SIZES ARE DIFFERENT FROM STANDARD APW HOT FOOD WELLS (HFW’S)
		OPERATION			CLEANING
1. Follow General Operating Instructions on page 3.				1. Follow General Cleaning Instructions on page 3

4