Aquatic LuxeAir Series owner manual Plumbing, Rough-In Measurements

INSTALLATION INSTRUCTIONS

PLUMBING:

1.After securing tub in place, normal waste and overflow and valves are installed per normal plumbing procedures, in accordance with all state and local standards.

2.Install standard 1-1/2” trap to drain and overflow. Before proceeding, make a final operational check by filling tub with water to overflow and operate pump for 5 minutes. Check for leaks carefully both while pump is running and has been turned off. Allow water to stand in tub for at least 30 minutes before draining. AQUATIC INDUSTRIES, INC. WILL NOT BE RESPONSIBLE FOR WATER DAMAGE OF ANY KIND IN CONNECTION WITH ONE OF OUR WHIRLPOOL BATHS.

Rough-In Measurements:
MODEL	A	B
	(From center of overflow pipe	(From center of
	to outside rim)	drain to tub rim)

B

A

5A

LuxeAir 21	6 1/2”	13 1/4”
LuxeAir 22	2 1/4”	12”
LuxeAir 23	5 3/8”	12”
LuxeAir 24	6 3/4”	14”
LuxeAir 25	5 1/4”	16 1/4”
LuxeAir 26	6 1/2”	13 1/2”
LuxeAir 27	2 1/4”	11 1/4”
LuxeAir 28	2 1/4”	11 1/4”
LuxeAir 29	2 1/2”	9 3/8”
LuxeAir 30	2 1/4”	10 1/2”
LuxeAir 31	1 3/4”	10 3/4”
LuxeAir 32	1 5/8”	9 1/4”
LuxeAir 33	3 1/2”	12 1/4”
LuxeAir 34	5 1/2”	13 1/2”
LuxeAir 35	3 1/2”	12 1/2”
LuxeAir 36	5 1/2”	13 1/2”
LuxeAir 37	6”	14”

PLEASE NOTE: The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required.

The dimensions needed for site preparation and structure building will differ; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

10 Aquatic Industries, Inc.