Arcam BDP300 manual English

Zone 1 audio output Coaxial digital output

Connect these to your amplifier’s CD (or other	Use this socket if you are using an AV receiver
line-level) input using suitable high quality	with a coaxial digital input. Connect to the	USB connection
interconnect cables. Ensure that the left and	digital input using a suitable 75Ω screened cable.
right audio outputs from the BD player are	CAUTION: Never connect the digital output	Insert USB flash memory devices
connected to the same left and right inputs on	socket to a conventional audio input.	here. USB memory can be used
your amplifier.		to save downloaded content. The
		BDP300 can also play certain digital
12V trigger input		files stored on USB memory drives:
	Composite video output	see page E-8.
This socket allows the BDP300 to be switched
in and out of standby mode by an amplifier	Connect this output to your display
(or another item of AV equipment) with a	if the display does not support any
12V TRIG OUT function: see page E-4.	other connection types.

Power inlet						VIDEO	L	R
Connect the correct
mains cable here.
						Y	Cb/Pb	Cr/Pr		USB
						VIDEO OUT / AUDIO		OUT
										Optical digital output
		RS232	Component video output							Use this socket if you are using an AV
										receiver with an optical digital audio input.
	This connection allows for remote		If your display does not support
	control from a third-party home			HDMI but has a component
	automation system or computer: see			input (Y, Pb, Pr), connect it to
	page E-4 for more information.				this video output.				Network connection
									Connect this socket to a		port on your network
					L, R audio output				router using an Ethernet patch cable: see
		Remote in							page E-9. An internet connection enables
				Use this analogue output (L, R),
									interactive content for BD-Live discs. For
	This allows remote-control signals to be received			to provide audio for use in your
									setup details, see ‘Network’ on page E-21.
	by the BDP300 if the remote sensor is covered			AV receiver’s Zone 2. It can also be
	(or otherwise not ‘visible’ to the remote-control:			used to connect a recording device
	see page E-4 for more information.			or headphone amplifier.
						HDMI digital video output
				Connect		this output to your display or AV
				receiver if available for the best digital video
				and audio connection: see page E-7 .

English

E-5