ASSEMBLY
CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding.
CARTON CONTENTS
1
6
2
3
5
4
1.Mower Unit
2.Mulch Cover
3.Side Discharge Chute
4.Mulch Plug
5.Literature Pack
6.Grass Bag
Figure 3 | OM1706 |
ASSEMBLY
NOTE: Remove all foam packaging from the unit.
1.Remove mower and handlebar from carton.
2.Install the handlebars on the pivot pins attached to the handlebar uprights.
NOTE: Make sure the cables (connected to the handlebar) are on the left side of the unit.
3.Remove the handlebar mounting hardware from the handlebar uprights.
4.Rotate the handlebar up or down to the desired height and align the mounting holes with the holes in the handlebar upright.
5.Secure the handlebars in position with hardware removed in step 3.
911110, 111
911112, 113
Figure 4
GB - 8