2

3 4 5 6

1

7

REPLACING HYDROSTATIC BELT

Remove

(Figure 24)

1.Remove PTO belt (see REPLACING PTO BELT on page 24).

2.Disconnect electric clutch connector.

3.Remove clutch stop.

CAUTION: Use care when releasing idler spring tension. Keep body parts well away from idler when performing this

1.Idler Spring

2.Electric Clutch

3.PTO Belt

4.Idler Hole

5.Idler Pulley

6.Idler Arm

7.Belt Cover

Figure 23

4.Remove PTO belt from left mower deck pulley.

5.Slowly release idler arm until tension is removed from idler spring.

6.Remove PTO belt from mower deck and electric clutch.

Install

(Figure 23)

NOTICE: Do not install PTO belt on left mower deck pulley in step 1.

1.Install PTO belt on electric clutch and mower deck.

2.Hook a puller into idler hole and pull idler arm towards outside of unit until PTO belt can be routed around left mower deck pulley.

3.Slowly release idler arm until idler pulley rests firmly against PTO belt.

4.Install belt covers on mower deck.

operation.

4.Disconnect idler spring.

5.Remove hydrostatic belt from hydrostatic transmission pulleys, pulley, electric clutch, and idler.

Install

(Figure 24)

1.Install hydrostatic belt on idler, electric clutch, pulley, and hydrostatic transmission pulleys.

2.Connect idler spring.

3.Install clutch stop.

4.Connect electric clutch connector.

5.Install PTO belt (see REPLACING PTO BELT on page 24).

1

 

6

2

 

 

2

3

 

 

 

 

 

 

4

 

5

 

 

 

1.Hydrostatic Belt

2.Hydrostatic Transmission Pulley

3.Pulley

4.Electric Clutch

5.Idler

6.Idler Spring

Figure 24

EN - 25