•Should be within 1/4" (6.35 mm) as measured on each side of the mower deck.
NOTICE: This measurement must be taken when the mower blade ends are perpendicular (at a right angle) to the frame of the unit.
|
|
|
|
|
| |||||
3 | 1 | 2 |
|
| ||||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" (6.35 mm) from
1.Mower Deck
2.Mower Blade
3.Ground
Figure 15
Adjusting The Mower Deck To Adjust Mower Blade Height And PitchNOTICE: Adjusting the mower deck will adjust the height and pitch of the mower blades.
1.Adjust the trunnions first and
a.The distance from the mower blades to the ground.
b.The forward pitch of the mower blades.
c.The pitch of the mower blades from
2.Repeat step 1 as needed until all three measurements are within the tolerances specified.
1 | 3 | 5 | 4 | 6 |
2 |
|
1.Rear Trunnion
2.PTO Belt
3.Mower Deck
4.Drag Link
5.Front Trunnion
6.Lift Arm
Figure 16
1
2
3
1.Deck Link
2.Mower Deck
3.Trunnion
Figure 17
EN - 21