4.To adjust deflector higher: Slide cable up. Tighten top nut.
5.Check travel and repeat adjustment as necessary.
921004, 006, 007, 008, 009
OS7175
1
2
1.Adjusting Nuts
2.Cable Support Bracket
Figure 27
DISCHARGE CHUTE (921004, 006, 007, 008, 009)
If chute does not stay in position while throwing snow or if chute does not rotate freely, adjust the cable under the control panel so the chute lock fingers engage or disengage the locking gear.
If chute does not stay in position:
Loosen the cable by loosening the lower adjustment nut, and then tightening the upper adjustment nut against the bracket (Figure 28).
921004, 006, 007, 008, 009
Tighten upper adjustment nut.
OS7180 | Loosen lower |
| |
| adjustment nut. |
| Figure 28 |
If chute does not rotate freely:
Tighten the cable by loosening the upper adjustment nut, and then tightening the lower adjustment nut against the bracket (Figure 29).
921004, 006, 007, 008, 009
Loosen upper adjustment nut.
OS7180 | Tighten lower | |
adjustment nut. | ||
| ||
| Figure 29 |
DISCHARGE CHUTE DEFLECTOR (921005)
Deflector must stay in selected position while blowing snow.
To adjust, loosen then retighten hardware to desired deflection drag force (Figure 30).
GB - 26