GENERAL LUBRICATION

(Figure 8)

1.Place unit into the service position (See Service Position on page 16).

IMPORTANT: Wipe each fitting clean before and after lubrication. DO NOT allow grease or oil to get on friction disc, friction plate or belts.

2.Apply Hi-Temp Grease or equivalent to the lubrication fittings after the first 16 hours of use and every 8 hours thereafter. See Service Parts on page 28.

3.Apply a few drops of oil to the roller chain at the beginning of the season or every 25 operating hours.

NOTE: Brush attachment gear case is lubricated at the factory and should not require additional lubrication.

4.Place unit into the operating position (See Operating Position on page 17).

Grease

 

Oil

 

Figure 8

OS0743

 

EN - 19

Page 19
Image 19
Ariens 926057 warranty General Lubrication