1 
2 
3
OS7185
OS7191
1.Attachment Clutch Cable
2.Adjustment Barrel
3.Jam Nut
Figure 32
3.With the attachment clutch disengaged, check that the attachment idler arm lightly touches the frame. See Figure 33.
With the attachment clutch disengaged, check the
attachment idler arm position
here. The attachment idler arm should lightly touch the frame.
OS7196
Figure 33
4.Tighten jam nut on the adjustment barrel.
Check Attachment Idler Arm Roller Clearance
NOTE: It will be difficult to check the measurement inside the frame. Use a 1/2 in. (12.7 mm) minimum spacer as a gauge to check the clearance between the roller and the frame.
1.With the clutch lever engaged, check the clearance between the frame and plastic roller on the lower end of the attachment idler arm. See Figure 34.
•If roller is 1/2 in. (12.7 mm) or more from frame, go to Adjust the Attachment Clutch Cable Spring Extension on page 31.
•If roller is less than 1/2 in. (12.7 mm) from frame, loosen idler adjustment nut and move idler closer to the belt. Tighten adjustment nut and recheck the roller clearance.
Some components removed for clarity of illustration.
41
2
3
OS7189
Roller should be a minimum of 1/2 in. (12.7 mm) from the frame when the attachment clutch is engaged.
1.Idler Adjustment Nut
2.Attachment Idler Arm
3.Roller
4.Frame
Figure 34
GB - 30