Setting the Quick Search ON and OFF
1 Press FUNC./SETUP.
2 Turn the Rotary encoder to select QUICK SEARCH, and then press 
/ENTER.
3 Turn the Rotary encoder to select ON or OFF, and then press 
/ENTER.
4 Press FUNC./SETUP to return to normal mode.
•Pressing 
during the procedure will return to the previous mode.
•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
•Operation is not required during Radio, HD Radio reception, CD or CD Changer mode.
Controllable With Remote Control
This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the remote control sensor.
Remote control sensor
8-EN
Radio
TUNER/SOURCE
Rotary encoder
PRESET VIEW
FUNC./SETUP 
/ENTER TUNE/A.ME
This unit cannot receive HD Radio signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the
iTunes Tagging lets you tag songs you hear on HD Radio stations with your new
If the unit is connected to a Tagging compatible device, you can use the iTunes Tagging function. For details, refer to the Owner’s Manual of the Tagging compatible device.
•The frequency area can be changed by setting MODE1 or MODE2 in Tuner mode. For details, refer to “Setting TUNER mode (TUNER)” (page 24).
Listening to Radio
HD Radio signals can be received if the HD Radio TUNER MODULE
1 Press TUNER/SOURCE to select the desired radio band (FM or AM).
FM*1 
AM 
AUX ZONE*2 
AUX*3 
BT AUDIO*4 
FM
*1 When an optional HD Radio tuner module is connected, the FM1, FM2 can be selected.
*2 Displayed only when the AUX ZONE is set to ON, refer to “Setting the AUX ZONE Mode” (page 24).
*3 Displayed only when the AUX is set to ON, refer to “Setting the AUX Mode
*4 Displayed only when BT IN is set to ADPT, refer to “BLUETOOTH Setting” (page 23).