SAT Radio Receiver (Optional)

SAT

Rotary encoder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRESET

 

VIEW

 

/ENTER

 

 

 

 

 

 

 

FUNC./SETUP

 

 

 

 

/

 

SAT Receiver:

XM or SIRIUS Receiver

 

 

 

When an optional XM or SIRIUS Receiver Box is

connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time.

SIRIUS Receiver: Verify the features of the connected SIRIUS Receiver Box. Not all SIRIUS Receivers have identical functions and some may not be performed on this unit. For details about individual functions, refer to the SIRIUS Receiver’s Owner’s Manual.

Receiving Channels with the SAT Radio Receiver (Optional)

About SAT Radio

Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM’s website at www.xmradio.com, or SIRIUS’ website at www.sirius.com.

To receive SAT Radio, the separately sold XM Direct™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult you nearest Alpine dealer.

*XM and its corresponding logos are trademarks of XM Satellite Radio Inc.

*SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc.

•The SAT Receiver controls on this unit are operative only when a SAT Receiver is connected.

28-EN

1

Press SAT to activate the SAT Radio mode.

2

Press

or

to select the desired channel.

 

Holding down

or

will change channels

 

continuously.

 

 

 

•When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control.

1While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control.

2Press ENTER on the remote control within 5 seconds to receive the channel.

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.

This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver.

It can also be displayed on the screen of this unit in the following way.

XM:

 

1 While receiving a XM Radio band, press

or

to select channel “0” for XM.

 

The unit displays “RADIO ID” and ID number simultaneously.

While displaying "RADIO ID" as shown above, Demonstration become nonfunctional (refer to “Demonstration” on page 25).

2 To cancel the ID number display, select the channel other than “0”.
SIRIUS:
1 While receiving a SIRIUS Radio band, press or
to select channel “255” or “0” for SIRIUS.
2 Press VIEW until the ID No. appears in the display.

The SIRIUS ID is displayed when the Song Name display mode is toggled. For details, refer to “Changing the Display” (page 12).

3 To cancel the ID number display, set the channel to other than “255” and “0”.

•You can check the ID number printed on a label on your third party, SAT Radio Receiver package.

Storing Channel Presets

1 Press and hold PRESET for at least 2 seconds.

The Preset screen is displayed.

2 Turn the Rotary encoder to select the preset number.
3 Press and hold /ENTER for at least 2 seconds.

The selected channel is stored.

•A total of 18 channels can be stored in the preset memory for either XM or SIRIUS.

•If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one.