Indication for iPod Mode
CURRENT
ERROR
•Abnormal current is run to the USB connector device.
-You can solve the problem by switching the source, turning the unit power off, or ACC to the OFF position.
Indication for USB memory
CURRENT
ERROR
•Abnormal current is run to the USB connector device.
-You can solve the problem by switching the source, turning the unit power off, or ACC to the OFF position.
DEVICE
ERROR
•A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit.
DEVICE
ERROR
•A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit.
NO USB
DEVICE
•An iPhone/iPod is not connected.
-Make sure the iPhone/iPod is correctly connected and the cable is not excessively bent.
•There are no songs in the iPhone/iPod.
-Download songs to the iPhone/iPod and connect to this unit.
•Communication error
-Turn the ignition key off, and then set to ON again.
-Check the display by reconnecting between the iPhone/iPod and this unit, using the iPod cable.
•Caused by the iPhone/iPod Software Version not being compatible with this unit.
-Update the iPhone/iPod Software Version to be compatible with this unit.
3
•The iPhone/iPod is not verified. - Change another iPhone/iPod.
42-EN
NO USB
DEVICE
•A USB memory is not connected.
-Make sure the USB memory device is correctly connected and the cable is not excessively bent.
•No song (file) is stored in the USB memory.
-Connect the USB memory device after storing songs (files).
UNSUPORT
•A sampling rate/bit rate not supported by the unit is used.
-Use a sampling rate/bit rate that is supported by the unit.
•A
-You can only play back
•Communication error