Setting the AUX ZONE NAME mode
AUX (Initial setting) / TV / DVD / PORTABLE / GAME
You can change the AUX Zone Name when AUX ZONE is set to ON.
Setting the AUX Mode (V-Link)
AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional
You can change the AUX NAME display when AUX is set to ON. Press
/ENTER when AUX is set to ON, and select AUX NAME by turning the Rotary encoder, then press /ENTER.
After that, turn the Rotary encoder to select the desired AUX name. If the
•Via
Setting the Changer Name
CHANGER (Initial setting) / PORTABLE
When an optional changer is connected, you can set the displayed mode name.
•The setting can be made only when a changer is connected. When two changers are connected, the CHANGER1 NAME/CHANGER2 NAME is displayed, and the setting can be made respectively.
Setting the External Digital Input (DIGITAL AUX)
DIGITAL AUX ON / DIGITAL AUX OFF (Initial setting)
When an ALPINE
You can change the
/ENTER.
•Press TUNER/SOURCE, and select the
•After input selection is completed, turn the ignition off and back on again. Setting of the optical digital input switch is completed.
•Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player’s power to OFF.
Setting the AUX+ Level (AUX IN GAIN)
LOW (Initial setting) / HI
After setting to ON in “Setting the AUX+ Mode”, this setting can be carried out.
LOW : Decreases the external input audio level.
HI : Increases the external input audio level.
Connecting to an External Amplifier (POWER IC)
ON (Initial setting) / OFF
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the
POWER IC OFF : Use this mode when the front
Speakers
Front
left
Amplifier
Front right
Rear
left
Amplifier
Rear right
ZONE2
Left
Amplifier
ZONE2
Right
POWER IC ON : The speakers are driven by the
Speakers
SPEAKER
RIGHT FRONTFront right
SPEAKER
RIGHT REARRear right
SPEAKER
LEFT REARRear left
SPEAKER
LEFT FRONTFront left
•No sound is produced by the system when the POWER IC is set to OFF.
Demonstration
DEMO ON / DEMO OFF (Initial setting)
This unit has a Demonstration feature for the display.
•To quit Demo mode, set to DEMO OFF.
Display Setting
DISPLAY is selected on the setup main menu in step 2.
Volume Level Bar Setting (VOL DISP)
ZONE1 (Initial setting) / ZONE2
When Volume mode is set to ALL, you can select the volume level bar for ZONE1 or ZONE2 on LCD display.