Dialing a Number In the Phone Book
(PHONE BOOK)

Up to 5,000 telephone numbers are downloadable to the BLUETOOTH compatible unit from a mobile phone. Dial a call by selecting a person from the phone book list.

Setting item: PHONE BOOK

•If a name cannot be obtained via the phone book, only the “--------” is displayed for 2 seconds.

•The names registered in the telephone book are displayed. If the name is not registered, a number is displayed. If both name and number cannot be displayed, “ID UNSENT” will be displayed.

•The names of PHONE BOOK are listed alphabetically with the same beginning alphabetical character, and can be skipped to the next

alphabetical character by pressing or .

e.g. press to the section beginning with alphabet B from A.

•The order of the list display depends on the design of the mobile phone.

•If the call history or phonebook of the mobile phone is added or deleted while it is connected to the unit, the list displayed on the unit may not be brought up to date. If it is not updated, you cannot correctly place a call.

Voice Dial Operation (VOICE DIAL)

You can call the telephone by performing voice operation after selecting VOICE DIAL in step 3.

1 Press /ENTER.

The speak mode is activated, and “SPEAK PLEASE” is displayed.

2 Say the telephone number, name you want to call into the microphone.

Pressing and holding for at least 2 seconds will cancel the voice dial mode.

•If the voice dial fails, the unit will return to normal mode in 60 seconds.

•You can perform this operation only when a voice dial compatible mobile phone is connected. If the mobile phone is not compatible with the voice dial, “NO SUPPORT” is displayed for 2 seconds.

•The Voice Dial function performance depends on the recognition range of the mobile phone and mounting location of the microphone. Note when the microphone is mounted.

•This operation cannot be performed when the current source is BT AUDIO.

•If a called person that you say is not found, “NO CALL” is displayed for 2 seconds.

•Voice dial operation depends on the function of the mobile phone. For details, refer to the Owner’s Manual of the mobile phone.

•If you place a call via voice dial, you cannot display a phone number or name.

20-EN

Sound Setting

Rotary encoder

AUDIO /ENTER

Adjusting Subwoofer/Bass/Treble/

Balance (Between Left and Right)/Fader

(Between Front and Rear)/Loudness/

Defeat

1 Press AUDIO repeatedly to choose the desired mode.

Each press changes the mode as follows:

SUBW LV*1 BASS LV*4 TREBLE LV*4

BALANCE LV*2 FADER LV*2/*3 LOUD*4 DEFEAT ZONE1/ZONE2*5 SUBW LV*1

Subwoofer: +0 ~ +15

Bass level: –7 ~ +7

Treble level: –7 ~ +7

Balance: –15 ~ +15

Fader: –15 ~ +15

Loudness : ON/OFF

Defeat : ON/OFF

ZONE1/ZONE2: 0 ~ 35

•If AUDIO is not pressed within 5 seconds after selecting the Subwoofer, Bass, Treble, Balance or Fader mode, the unit automatically returns to normal mode.

•Loudness introduces a special low-and high-frequency emphasis at low listening levels. This compensates for the ear’s decreased sensitivity to bass and treble sound. The function is inoperable when DEFEAT is set to ON.

•When an external audio processor is connected, if the selected source (such as CD changer, etc.) via Ai-Net carried out, there will be no sound output from ZONE2.

*1 When the subwoofer mode is set to OFF, its level cannot be adjusted. *2 BALANCE and FADER are effective only for ZONE1 (Front, Rear,

Subwoofer).

*3 If you set the 4.2ch (FRONT/REAR/SUBW.)/2.2ch (3WAY) switch of the IMPRINT audio processor (PXA-H100) to 2.2ch (3WAY), you cannot adjust the FADER mode. For details, refer to the Owner’s Manual of PXA-H100.

*4 When an external audio processor is connected, this setting cannot be made.

*5 Adjust the volume level of the selected (ZONE1/ZONE2/ALL). For volume mode setting, refer to “Multi-Zone Volume Control” (page 7).

2 Turn the Rotary encoder until the desired sound is obtained in each mode.

•Depending on the connected devices, some functions and display indications do not work.