ChannelMag

Section 1 Introduction

1.1Scope: ChannelMag CM2

The ChannelMag CM2 is suitable for open channels having diverse cross sectional shapes from 6” to 200 feet (150 mm to 60 m). They meet or exceed the requirements of ISO 9213 and are calibrated in a long open tank, believed to be the largest NIST traceable facility available. The ChannelMags are calibrated in accordance with ISO* approved methods. Each ChannelMag system is normally supplied with a NIST traceable Calibration Certificate.

Magnetic enhancement plates are fixed to and calibrated with ChannelMag sensor types CM2/8” – 40”. The enhancement plates are purposely made to the required shape of the channel, to widths or diameters from 10” to 15 feet (250 mm to 3 m). Their purpose is to determine the distribution pattern of magnetic flux on calibration in ARKON test laboratory and to insure it is the same as the distribution on-site. In this way, the test calibration is the same as on-site. For channels less than 10” (250 mm) or wider than 15 feet (4500 mm), or when used with ChannelMag type CM2/D, the effectiveness of the enhancement plates is minimal, so they are not normally supplied.

ChannelMag CM2 sensors generate a powerful magnetic field over the whole or significant area of the channel. They operate using Faraday’s Law, where a conductor moving in a magnetic field induces a voltage, the amplitude of which is proportional to the velocity of the conductor. The conductor is the media being measured. Large conical electrodes on the CM2 sensor measure the voltage signal, which is the mean velocity of the complete cross sectional flow and is unaffected by media viscosity or density.

Volumetric flow is computed in the 4411e by multiplying level x mean velocity. The level signal from a diverse range of cross sectional shapes can be linearized in the 4411e. Level is measured normally by a high resolution ultrasonic level transducer. If the level sensor needs to be hidden from view, or if there is substantial froth on the media surface, then a high resolution pressure transducer is used under the ramps of the CM2 sensor.

6

Page 5 Page 7
Page 6
Image 6
Arkon Channelmag instruction manual Introduction, Scope ChannelMag CM2
Page 5 Page 7

Channelmag specifications

Arkon Channelmag is a dynamic digital platform designed to streamline content dissemination and enhance communication among businesses, consumers, and content producers. As a cutting-edge solution, it tailors its features to meet the diverse needs of modern audiences, emphasizing engagement, accessibility, and user-friendliness.

At its core, Arkon Channelmag utilizes a robust content management system (CMS) that allows users to create, edit, and manage digital content effortlessly. The CMS supports a variety of media formats, including text, images, videos, and interactive elements, providing a comprehensive toolkit for content creators. This versatility enables businesses to produce visually appealing and informative content that captures the attention of their target audience.

One of the standout features of Arkon Channelmag is its integration of artificial intelligence (AI) and machine learning algorithms. These technologies analyze user behavior and engagement patterns, allowing for personalized content recommendations that enhance user experience. This tailored approach not only keeps users engaged but also drives traffic to businesses by presenting them with relevant content that aligns with their interests.

Another key characteristic of Arkon Channelmag is its responsive design, which ensures that content is accessible across all devices, from desktops to smartphones. The platform’s mobile optimization is essential in today’s digital landscape, where users expect seamless experiences regardless of the device they are using. This adaptability allows businesses to reach a wider audience and fosters higher engagement rates.

The platform also prioritizes collaboration by allowing multiple users to work on content simultaneously. This feature facilitates teamwork and accelerates the content creation process, crucial for businesses aiming to stay ahead in a competitive market. Furthermore, the built-in analytics tools provide insightful metrics on content performance, enabling users to make data-driven decisions and refine their strategies accordingly.

Security is another hallmark of Arkon Channelmag, with advanced encryption protocols and compliance with data protection regulations ensuring that user data is safeguarded. This commitment to security fosters trust among users, making Arkon Channelmag a credible choice for businesses that prioritize privacy and data integrity.

In summary, Arkon Channelmag stands out in the digital landscape through its rich features, innovative technologies, and user-centric design. By focusing on content management, personalization, collaboration, and security, it equips businesses with the tools they need to thrive in a rapidly evolving digital environment.
Top Page Image Contents