ARM ARM DUI 0137A manual Select Configure Interface from the Options menu

Connecting to RMHost

Note

If Load Image is disabled, you must stop the currently running application by selecting Stop from the Execute menu.

The image might stop at main() if the program contains this function. In this case, select Go from the Execute menu to continue from the breakpoint.

3.While your program is running, configure the interface as follows:

a.Select Configure Interface from the Options menu.

b.Select the General tab.

c.In the Target connection drop-down menu, select the option ATTACH:

Connect according to target properties, as shown in Figure 2-2.Click

OK.

Figure 2-2 Configure interface dialog box

4.Select the RealMonitor target as follows:

a.Select Configure Target from the Options menu. The Choose Target dialog box is displayed.

b.Select RealMonitor.dll as the target DLL, as shown in Figure 2-3 on page 25.

24 Copyright © 2000 ARM Limited. All rights reserved.. All rights reserved. ARM DUI 0137A