Describes how to do this | ARM ARM DUI 0137A

Connecting to RMHost

If not present in the list, click Add and select RealMonitor.dll from the Bin directory of the ADS installation. (If DLL files do not appear, use Windows Explorer to ensure that files of extension .dll are not hidden from view.)

The Choose Target dialog box is redisplayed.

When you select RealMonitor.dll, AXD displays the following message:

Connect the ARM Debugger to a target board using a unit such as Multi-ICE.

Boards require RMTarget software.

Step 5 describes how to do this.

Figure 2-3 Choose Target dialog box

5.Click Configure. The RealMonitor Configuration dialog box is displayed, an example of which is shown in Figure 2-4 on page 26.

Note

If you have previously configured RMHost using the RealMonitor Configuration dialog box, you need to repeat the configuration process only if the configuration details have changed. If no details have changed, you can proceed to step 10.

ARM ARM DUI 0137A manual Describes how to do this

Models: ARM DUI 0137A

Step 5 describes how to do this.

Figure 2-3 Choose Target dialog box

ARM DUI 0137A