Arrow Plastic CL72-A Door Assembly, Step, Parts Needed For, Hasp 9936 CAUTION SHARP EDGE

Step 2		● 9435 Horizontal Door Brace (four)
	● Parts Needed For ●	● 9936 Right Door (one)
		● 9937 Left Door (one)
	Door Assembly	● 66612 Astragal (one)
BK15		● 67732 Foam Board (two)
		● 9942 Vertical Door Brace (two)

The steps on this page tell how to assemble the doors. Proceed as fol- lows:

1Position hinges on sides of right and left door panels as shown and fasten with 7/16" flat head bolts out- side and #6 hex nuts inside.

2Slide foam board under lip of door,

END VIEW

#6-32x3/4" Flat Head Bolt

Hasp

#6 Hex Nut

9435	Hinge	STEP
			Hinge
		1
			7/16" Flat Head Bolt

away from hinges, foil facing out- ward. See caution. Hold the vertical door brace against the long edge of the foam board inside the door and fasten to door using 5 bolts and nuts.

Hasp 9936 CAUTION:

SHARP EDGE

66612

STEP

9942

9435

Screw

3Cover ends of door panel with hor-

izontal door brace. Edge of door panel slides into brace. Fasten brac-

5 67732 Foil Side

STEP STEP

2 3

es to doors using two screws.

4Using an awl, ice pick or nail, push

END VIEW

#6-32x3/4" Flat Head Bolt

Swivel Staple

holes through foam board at the hasp and staple holes. Attach hasp to right door and swivel staple to left door using #6-32x3/4" flat head bolts and #6-32 hex nuts. Tighten nuts through

#6 Hex Nut

STEP

4

foam board using a needle nose pli- ers until they are against inside of door panel.

5Position astragal to right door, as

shown, and fasten using six screws.

6Fasten the spring latch at the top of left door, using three screws.

7Set the doors aside for later use.

	STEP
9435	6	Swivel Staple
	Spring Latch

	Hinge
Screw
		67732
STEP			Hinge	9435
7		7/16" Flat Head Bolt
				Foil Side
				9942

15