| Step 3 | ● Parts Needed For ● | ● 8984 Side Floor Frame (two) |
|
| Floor Frame Assembly | ● 9429 Ramp (one) |
| |
| ● 9430 Front/Rear Floor Frame (two) |
| ||
| BJ16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
The floor frame at the front of building is made up of two pieces. Proceed as follows:
1Center the ramp on top of the front floor frame. Join the frames by in- serting four screws.
2Place the floor frames on the foun-
Level
dation. Assemble the four corners of the floor frame using two screws at each corner as shown.
3Measure the floor frame diagonally. When the diagonal measurements are equal, the floor frame is square.
NOTE
Do not fasten the floor frame to your foundation at this time. You will anchor the building after it is erected.
STEP
1
STEP
2
8984
9430
9430
8984
9430
9429
Screw
8984
The floor frame must be square and level or holes will not align.
WhenDiagonalMeasurementsare
Equal the Floor Frame is Square.
STEP
3
16
