PLAN AHEAD....
A3
Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground.
Teamwork: Whenever possible, two or more people should work together to assemble your building. One person can position parts or panels while the other is able to handle the fasteners and the tools.
Tools and Materials: These are some basic tools and materials you will need for the construction of your building. Decide which method of anchoring and the type of foundation you wish to use in order to form a complete list of the materials you will need.
Required
•Eye Goggles
•No. 2 Phillips Screwdriver
(With Hardened Magnetic Tip) Note: A power screwdriver or vari- able speed drill with
Required |
|
|
• Work Gloves | Optional | Foundation Preparation |
• Step Ladder | ||
• Utility Knife / Scissors | • Wrench / Nut Driver | • Hammer and Nails |
• Pliers | • Electric / Cordless Drill | • Spade or Shovel |
• Carpenter's Level | • Square | • Hand Saw / Power Saw |
• Tape Measure | • String (for squaring frame) | • Lumber and/or Concrete |
Selecting and Preparing Your Site: Before assembly, you will want to decide on a location for your building. The best location is a level area with good drainage.
•Allow enough working space for ease of moving parts into position during assembly. Be sure there will be enough space at entrance for doors to open fully and enough space around the building to be able to fasten the panel screws from the outside.
•Before you begin the first steps in assembling your parts, a foundation should be constructed and an anchoring system should be ready to use.
3
