ArtDio IPF-2600 user manual Will mute the conversation

IPF-2600 User’s Manual/

3.2.6 CallIPF2600Waitingcan supportand Switch2 Lines,betweenuser can switchCalls to another line for making or answering calls and使用手冊 automatically put an ACTIVE call on Hold.

When receiving second incoming calls, besides playing a stutter Call Waiting tone,IPF2600 will pick up the next corresponding available LINE.

3IPF2600.2.7 CallsupportsTransfer:both BLIND and ATTENDED Transfer:

1. Blind Transfer: When in conversation with an “ACTIVE” LINE If there is no LINE on HOLD, user press “Hold” button, hold current Line call, Then press “XFER” button Input target number, this will directly transfer the holden party in the corresponding LINE to the dialed number.

2. AttendedWhen a LINE is “ACTIVE”, user will get a dial tone by pressing the “XFER” button, then dial the number and then press the “#” button, user could talk with the Line and then hang up, the Holden Line will connect with the current Line.

Note:

Transferring calls across SIP domains need to be supported by SIP services.

3•.2.8 3-IPF2600Way Conferencesupports 3-way conference. With one LINE ACTIVE and another LINE on HOLD, press the CONF button then the LINE that is on HOLD will join the three parties together in a conference.

If after pressing the “CONF” button, a user (not Holder) decides not to conference anytime, user can cancel it and resume the conversation by pressing “Hold” or the original LINE button.

If the conference holder wishes to end a conference, simply Hook Off or press “Speaker” button, the conference Holder could not to hold /resume the conference, if the conference holder hang up, the other user could continuous talk with each other, which breaks the conference and places both parties, user can then talk to each individual party.

3.2.9 MuteWhen in conversation with an ACTIVE LINE, pressing “MUTE” MUTE will mute the conversation,

that is, you can hear the other party but the other party cannot hear you. Pressing the button again will resume the conversation.

3.2.10SpeedThere Dialare 10(M1-M4 and “0”,”5-9”) speed dial buttons, each can be configured with a different account to dial.

Press M1-M4 will directly dial the preset calling party number at Speakerphone mode

Pick up handset or Press “Speaker” button, Press “0-9” followed by “#” to call the preset calling party number.

Note:

M1-M4 Support PSTN Speed Dial if No PSTN Active/Hold (Default PSTN). “0-9” only Support IP/SIP Speed Dial.

17