Jitter Size
Service Type
Service Addr
Service ID
NAT Traversal
Please do not check this box and leave the Service Addr field blank.
※If the Gatekeeper is not to be used, please configure the Service Port
as 1720. Detailed information please refers to the “Service Port” configuration.
zFor MGCP protocol:
Please check this box, and then enter the IP address or domain name of the Call Agent in the Service Addr field.
Setup the jitter buffer size for the RTP voice packet. Jitter buffer ensures that the received packets are in correct order. The range for the jitter size is between 0 to 32 voice packets. The default setting value of 0. A bigger jitter size can store more packets, but may cause more delay.
The default Service Type is “Common”. For other requests, please find the service type in the drop down list.
Enter the corresponding IP address or domain name of the server based on the protocol been used.
zUse H.323 protocol
If “Use Service” option is checked, please enter the IP address or domain name of the Gatekeeper in this field.
If “Use Service” option is not checked, please enter the IP address or domain name of the voice gateway in this field.
zUSE MGCP protocol:
Please enter the IP address or domain name of the Call Agent.
zUse SIP protocol:
If “Use Service” option is checked, please enter the IP address or domain name of the SIP Proxy Server in this field.
Enter the corresponding Service ID if required by the register server. When
zDisable
When
When
zEnable
Resolve public IP of the NAT router automatically. When
zSTUN
Use the STUN protocol. STUN enables a device to find out its public IP address and the type of NAT service its sitting behind. It helps the
14
