ArtDio Network Settings Using Status Button on IPS-2101h, Static IP Settings, Dhcp Settings

IPS-2101h User Manual

5. Network Settings Using Status Button on IPS-2101h

【The default network setting is DHCP mode】

Press the Status Button on the IPS-2101h, and pick up the handset, you will be able to hear the voice prompt indicating the IP address of your IPS-2101h. If the IP address you hear is 0.0.0.0, then there is no IP address available or the internet connection is bad. Please follow the network settings described below.

IPS-2101h can use telephone to configure some simple network settings. Please use the web browser to configure more detailed settings.

5.1Static IP Settings

1.Connect the RJ-45 Ethernet cable to the LAN port on the IPS-2101h, and then plug in the power.

2.Connect the RJ-11 telephone cable to the FXS port on the IPS-2101h.

3.Pick up the handset. If you hear some short “Du Du Du” tones, or one long “Du” tone, the connection is good.

4.Pick up the handset Æ Press 1234 Æ If the green lights shows on the Status buttonÆ Press 0 Æ Hang up the phone to reboot IPS-2101h.

5.Pick up the handset Æ Press 1234 Æ If the green lights shows on the Status button Æ Enter the static IP address, for example, 192.168.1.101 (use “*” to represent “.”) Æ Press the Status Button on IPS-2101h Æ Hang up the phone to reboot IPS-2101h and to activate the new IP address.

5.2DHCP Settings

1.Connect the RJ-45 Ethernet cable to the LAN port on the IPS-2101h, and then plug in the power.

2.Connect the RJ-11 telephone cable to the FXS port on the IPS-2101h.

3.Pick up the handset. If you hear some short “Du Du Du” tones, or one long “Du” tone, the connection is good.

4.Pick up the handset Æ Press 1234 Æ If the green light shows on the Status Button, press 1 for DHCP Æ Press the Status Button on IPS-2101h Æ Hang up the phone.

5.Once IPS-2101h is rebooted, it will automatically acquire an IP address from DHCP server.

10