Control port
Register TTL
RTP TOS
RTP Port
Local Type
Call Type
DTMF
zWith H.323 protocol used, this port is mapped to the H.245 port. H.245 protocol defines call control signal, and uses TCP protocol. The value can be set from 1024 to 65535.
zWith MGCP or SIP protocol is used, there is no specific request for this port. You can enter any port number.
※If there are many
each of them should be assigned with different port number.
Define how many seconds a register message will be sent to the server. The default value is 60 seconds. The range is from 0 to 254.
Define the TOS value in the IP header within the RTP packet. The default value is 0. The range is from 0 to 254. Bigger values have higher priority.
RTP port is the port transmitting and receiving voice data using UDP protocol. Please enter an even number between 1024 and 65535 into this field.
This parameter refers to the type of
•Phone number:
Use the phone number as E.164 and H.323 ID to login the Gatekeeper.
•Account:
Use account authentication to login. Please also enter the account name and password into the Account and PIN fields.
•H.235 account
With H.323 protocol used, if the Gatekeeper supports H.235 protocol, please select this option. Please also enter the account name and password into the Account and PIN fields.
Define call type by selecting either “normal” or “advanced” from the drop down list. The recommended setting is “advanced”.
Define the DTMF signal sending method by selecting Control string, Inband audio, Signal keypad, or RFC 2833 from the drop down list. If you can not dial the extensions, please select “Inband audio”.
6.3Phone Settings
16
