Installation
Voltage Requirements
Check the AC power line voltage used in your area. The AC power adapter included with the FS4002E and FS4004E Switches must match the utility power.
The FS4008E and FS4016E are equipped with an internal power supply. Power sensing is automatic for all international utility power. There is no power switch on either of these units, they are powered on when the power cord is connected between the Switch and the power outlet.
Mounting Configurations
This section describes how to mount the Switch on a desktop or a wall. It also explains how to install the Switch in an equipment rack.
Desktop Mounting
To mount the Switch on a desktop or shelf:
1 Attach the four rubber feet (supplied) to the bottom of each corner on the Switch. See Figure
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Power 
F |
|
|
|
|
|
|
|
RIENDLYNET |
|
|
|
|
|
| |
Fast Ethernet Switch |
|
|
|
| |||
1 | 2 | 3 | 4 | 5 |
|
|
|
| 6 | 7 |
| ||||
|
|
|
| 8 | |||
|
|
| Switched 10/100Mbps Ports |
|
|
| |
or
Uplink
FS4008E
Figure 2-9 Desktop mounting
2 Place the Switch on a flat, stable, horizontal desktop or shelf.
Make sure you allow enough ventilation space between the Switch and surrounding objects.
The Switch is ready for network connections.
Page
