Asante Technologies FS4002E/FS4004E Cabling and Voltage Requirements, Cabling Requirements

Cabling and Voltage Requirements

Uplink Port (Selector)

FRIENDLYNET

FS4016E

																16-port 10/100 Fast Ethernet Switch
																2	4	6	8	10	12	14	16	or
Power
100 Mbps
FDP																								Uplink
Activity
Link								9	10	11	12	13	14	15	16
1	2	3	4	5	6	7	8									1	3	5	7	9	11	13	15

Switched 10/100Mbps Ports

Sixteen 10/100 Ports

Figure 2-7 FriendlyNet FS4016E front panel

The back panel of the FS4016E contains a 100-240 VAC power connector. There are no other controls or indicators. See Figure 2-8.

AC Power Connector

AC Power 100-240V

Figure 2-8 FriendlyNet FS4016E back panel

◆Note: The FS4016E does not have a power switch. The FS4016E is automatically powered on as soon as the power cord is connected between the FS4016E and a power outlet.

Cabling and Voltage Requirements

This section describes the cabling and voltage requirements of the Switches.

Cabling Requirements

100Base-TX requires the use of data-grade Category 5) UTP (unshielded twisted-pair) cable. Category 3 wiring may be used for 10Base-T.

▲Important! Some installations have Category 5 cabling but do not have wall outlets and/or wiring closet punch-down blocks that meet Category 5 requirements.

100Base-TX requires that all wiring and accessories meet EIA/TIA 568B specifications for proper operation. When wiring a 100Base-TX network, make sure that the entire cable plant meets specifications.

Page 2-5