7.3 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.
BIOS SETUP UTILITY
Main OC Tweaker
Advanced H/W Monitor Boot | Security | Exit |
OC Tweaker Settings
Overclock Mode |
|
| [Auto] | |
BCLK Frequency (MHz) | [133] | |||
Boot Failure Guard |
|
| [Enabled] | |
Boot Failure Guard Count |
| [3] | ||
Spread Spectrum |
|
| [Auto] | |
CPU Ratio Setting |
|
| [Auto] | |
QPI Frequency |
| 4.800GT | [Auto] | |
DRAM Frequency |
| |||
DDR3_1066 | [Auto] | |||
| ||||
DRAM Timing Control |
|
| ||
VCCM(DRAM) Voltage |
| [Auto] | ||
| ||||
Would you like to save current setting as | ||||
user defaults ? |
|
|
| |
Save 1st User Defaults |
|
| [User Default 1] | |
Overclocking may cause damage to your CPU and motherboard.
It should be done at your own risk and expense.
| Select Screen |
| Select Item |
Enter | Go to Sub Screen |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual] and [Optimized]. The default value is [Auto].
BCLK Frequency (MHz)
Use this option to adjust BCLK (Internal Base Clock) frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
Spread Spectrum
This item should always be [Auto] for better system stability.
CPU Ratio Setting
If the ratio status is unlocked, you will find this item appear to allow you changing the ratio value of this motherboard.
QPI Frequency
Use this option to adjust QPI (QuickPath Interconnect) frequency. Configu- ration options: [Auto], [3.200GT], [3.733GT], [4.266GT] and [4.800GT]. The default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may select [Auto], [400MHz DDR3_800)] or [533MHz DDR3_1066)].
3 8
