3.7 Boot Screen
In this section, it will display the available devices on your system for you to config- ure the boot settings and the boot priority.
Fast Boot
Fast Boot minimizes your computer’s boot time. There are three con- figuration options: [Disabled], [Fast] and [Ultra Fast]. The default value is [Disabled]. Please refer to below descriptions for the details of these three options:
[Disabled] - Disable Fast Boot.
[Fast] - The only restriction is you may not boot by using an USB flash drive.
[Ultra Fast] - There are a few restrictions.
1.Only supports Windows® 8 UEFI operating system.
2.You will not be able to enter BIOS Setup (Clear CMOS or run utility in Widows® to enter BIOS Setup).
3.If you are using an external graphics card, the VBIOS must support UEFI GOP in order to boot.
Setup Prompt Timeout
This shows the number of seconds to wait for setup activation key. 65535(0xFFFF) means indefi nite waiting.
Bootup Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock function after
PCI ROM Priority
Use this item to adjust PCI ROM Priority. The default value is [Legacy ROM].
54
