2.7 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Plac- ing jumper caps over the headers and connectors will cause permanent damage to the motherboard!
Serial ATA3 Connectors
(SATA3_1: |
|
see p.2, No. 18) | SATA3_8 |
(SATA3_2: |
|
see p.2, No. 19) |
|
(SATA3_3: | SATA3_7 SATA3_5 SATA3_4 |
see p.2, No. 20) |
|
(SATA3_4: |
|
see p.2, No. 17) |
|
(SATA3_5: | SATA3_3 SATA3_2 SATA3_1 |
see p.2, No. 16) |
|
(SATA3_7: |
|
see p.2, No. 15) |
|
(SATA3_8: |
|
see p.2, No. 14) |
|
These seven Serial ATA3 (SATA3) connectors sup- port SATA data cables for internal storage devices.
The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.
Serial ATA (SATA) | Either end of the SATA data |
Data Cable | cable can be connected to |
(Optional) | SATA / SATA2 / SATA3 hard |
| disks or the SATA2 / SATA3 |
| connectors on this mother- |
| board. |
English
Print Port Header | AFD# |
|
|
| ERROR# |
|
|
PINIT# | GND |
| |
SLIN# |
| ||
|
|
| |
(see p.2, No. 29) | 1 |
|
|
|
| SPD7 | |
|
| SPD6 | ACK# |
|
| SPD5 | BUSY |
|
| SPD4 | PE |
| SPD3 | SLCT | |
| SPD2 |
|
|
| SPD1 |
|
|
| SPD0 |
|
|
| STB# |
|
|
This is an interface for print port cables that allows con- venient connection of printer devices.
26
ASRock FM2A85X
