ASRock G41M-VS3 R2.0 manual Certifications, FCC, CE, Whql

English

8

Certifications - FCC, CE, WHQL

-ErP/EuP Ready (ErP/EuP ready power supply is required) (see CAUTION 19)

*For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the third- party overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.

CAUTION!

1.About the setting of “Hyper Threading Technology”, please check page 34 of “User Manual” in the support CD.

2.This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 21 for details.

3.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 14 for proper installation.

4.Please check the table below for the CPU FSB frequency and its corresponding memory support frequency.

CPU FSB Frequency	Memory Support Frequency
1333	DDR3 800, DDR3 1066, DDR3 1333
1066	DDR3 800, DDR3 1066
800	DDR3 800

533DDR3 800

*DDR3 1333 memory modules will operate in overclocking mode.

*When you use a FSB533-CPU on this motherboard, it will run at DDR3 533 if you adopt a DDR3 800 memory module.

*If you adopt FSB1333-CPU and DDR3 1333 memory module on this motherboard, you need to adjust the jumper. Please refer to page 17 for proper jumper settings.

5.Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 7 / VistaTM / XP. For Windows® OS with 64-bit CPU, there is no such limitation.

6.The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check Intel® website for the latest information.

7.Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 24 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.

8.Power Management for USB 2.0 works fine under Microsoft® Windows® 7 64-bit / 7 / VistaTM 64-bit / VistaTM / XP 64-bit / XP SP1 or SP2.

ASRock G41M-VGS3 / G41M-VS3 Motherboard