Asus A7N8X-XE Using Asus EZ Flash to update the Bios, To update the Bios using Asus EZ Flash

2.1.5Using ASUS EZ Flash to update the BIOS

The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash is built-in the BIOS LPC chip so it is accessible by simply pressing <Alt> + <F2> during the Power-On Self Tests (POST).

To update the BIOS using ASUS EZ Flash:

1.Visit the system builderʼs website to download the latest BIOS file for your motherboard and rename it to A7N8X-XE.ROM. Save the BIOS file to a floppy disk.

2.Reboot the system.

3.To launch EZ Flash, press <Alt> + <F2> during POST to display the following.

User recovery requested. Starting BIOS recovery...

Checking for floppy...

• If there is no floppy disk in the drive, the error message “Floppy not found!” appears.

• If the correct BIOS file is not found in the floppy disk, the error message “A7N8X-XE.ROM not found!” is displayed.

4.Insert the floppy disk that contains the BIOS file. If the A7N8X-XE.ROMfile is found in the floppy disk, EZ Flash performs the BIOS update process and automatically reboots the system when done.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!

User recovery requested. Starting BIOS recovery...

Checking for floppy...

Floppy found!

Reading file “a7n8x-xe.rom”. Completed.

Start flashing...

Flashed successfully. Rebooting.

2-6 Chapter 2: BIOS Setup