Asus A7N8X-XE manual Security, Wait for ʻF1ʼ If Error Enabled, Hit ʻDELʼ Message Display Enabled

Wait for ʻF1ʼ If Error [Enabled]

When set to Enabled, the system waits for the F1 key to be pressed when error occurs. configuration options: [Disabled] [Enabled]

Hit ʻDELʼ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]

2.6.3Security

This menu allows you to adjust the system security settings.

	BIOS SETUP UTILITY
Security Settings		<Enter> to change
		password.
Supervisor Password	:Not Installed	<Enter> again to
User Password	:Not Installed	disable password.
Change Supervisor Password
Change User Password
		←→	Select Screen
		↑↓	Select Item
		Enter	change
		F1	General Help
		F10	Save and Exit
		ESC	Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a password:

1.Select the Change Supervisor Password item and press <Enter>.

2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a user password.

To clear the supervisor passowrd, select the Change Supervisor Password then press <Enter>. The message “Password Uninistalled” appears.

ASUS A7N8X-XE Motherboard 2-29