Write the BIOS filename on a piece of paper. You need to type the exact BIOS file name at the prompt.
2.Copy the AFUDOS.EXE utility from the support CD to the bootable floppy disk that contains the BIOS file.
3.Boot the system from the floppy disk.
4.At the DOS prompt, type the command line:
afudos /i [filename.rom]
where [filename.rom] means the latest (or original) BIOS file that you copied to the bootable floppy disk.
5. Press <Enter>. The screen displays the status of the update process.
The BIOS information on the screen is for reference only. What you see on your screen may not be exactly the same as shown.
AMI Firmware Update Utility - Version 1.10
Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done
Erasing flash .... done
Writing flash .... 0x0008CC00 (9%)
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!
When the BIOS update process is complete, the utility returns to the DOS prompt.
AMI Firmware Update Utility - Version 1.10
Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done
Erasing flash .... done
Writing flash .... 0x0008CC00 (9%)
Verifying flash .. done
A:\>
6. Reboot the system from the hard disk.
Chapter 2: BIOS Setup |