3.HARDWARE SETUP
3.2Layout Contents
Motherboard Settings1) | JEN | p. 17 | JumperFree Mode (JumperFree/Jumper Mode) |
2) | SW1 | p. 18 | CPU External Frequency Setting |
1) | System Memory | p.19 | System Memory Support |
2) | DIMM1/2 | p.20 DIMM Memory Module Support | |
3) | Socket 462 (Socket A) | p.21 | CPU Support |
4) | PCI1/2/3 | p.22 |
1) | PS2KBMS | p.25 | PS/2 Mouse Port Connector (6 |
2) | PS2KBMS | p.25 | PS/2 Keyboard Port Connector |
3) | USB | p.26 | Universal Serial Bus Connectors 0 & 1 (Two |
4) | COM1 | p.26 | Serial Port Connector |
5) | VGA | p.26 | Monitor Output Connector |
6) | PRINTER | p.27 | Parallel Port Connector |
7) | GAME_AUDIO | p.27 | Game/MIDI Connector |
8) | GAME_AUDIO | p.27 | Audio Port Connectors (Three 1/8” female) (optional) |
9) | RJ45 | p.28 | |
10) | PRIMARY IDE | p.28 | IDE Connectors (Two |
| SECONDARY IDE |
|
|
11) | FLOPPY | p.29 | Floppy Disk Drive Port Connector (34 pins) |
12) | CHASS | p.29 | Chassis Intrusion Lead |
13) | IR | p.30 | Infrared Module Connector (5 pins) |
14) | WOL_CON | p.30 | |
15) | WOR | p.31 | |
16) | CPU_, PS_, CHASS_FAN | p.31 | Chassis, Power Supply, CPU Fan Connectors (3 pins) |
17) | CD_IN, AUX, VIDEO, | p.32 | Internal Audio Connectors (4 |
| MODEM |
|
|
18) | HPHONE | p.32 | Headphone |
19) | USB2 | p.33 | USB Header |
20) | SMB | p.33 | SMBus Connector |
21) | ATXPWR | p.34 | ATX Power Supply Connector (20 pins) |
22) | IDELED | p.34 | IDE Activity LED (2 pins) |
23) | SPEAKER (PANEL) | p.35 | System Warning Speaker Connector (4 pins) |
24) | PWR.LED (PANEL) | p.35 | System Power LED Lead (3 pins) |
25) | RESET (PANEL) | p.35 | Reset Switch Lead (2 pins) |
26) | PWR.SW (PANEL) | p.35 | ATX / |
27) | SMI (PANEL) | p.35 | System Management Interrupt Lead (2 pins) |
Layout Contents
3. H/W SETUPASUS | 15 |