Asus A7VL-VM NOTE:, SETUP H/W, IMPORTANT:, Jumper Mode, CPU Frequency, 4.4 Advanced Menu, ASUS CONTACT INFORMATION, Operating Frequency Setting

SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

2)CPU External Frequency Setting (SW1 Switches 1–4)

This option tells the clock generator what frequency to send to the CPU, SDRAM, and the chipset. This allows the selection of the CPU’s External frequency. The CPU External Frequency multiplied by the Frequency Multiple equals the CPU’s Internal frequency (the advertised CPU speed).

IMPORTANT:

1.To use this feature, JEN must be set to Jumper Mode: [1-2]; (See #1 on the previous page).

2.Otherwise, if JumperFree Mode is enabled, SW1 Switches 1,2 and 4 must be set to ON and SW1 Switch 3 to OFF (See #1 on the previous page) and then use BIOS setup in place of these switches (set Operating Frequency Setting to User Define under 4.4 Advanced Menu in BIOS Setup to set the CPU Frequency).

								ON								ON
								1		2	3		4		1			2	3		4
						CPU			100MHz								103MHz
								ON								ON
							1		2		3	4			1		2		3	4
				A7VL-VM		CPU			105MHz								110MHz
								ON
	A7VL-VM CPU
	External Frequency Selection						1		2		3	4
						CPU			133MHz
External Frequency Table
CPU			PCI			Frequency Selection Switches
(MHz)			(MHz)		1	2								3						4
100.00		33.33			[ O N ]	[ O N ]								[OFF]								[ O N ]
103.00		34.33			[OFF]	[ O N ]								[OFF]								[ O N ]
105.00		35.00			[ O N ]	[OFF]								[OFF]								[ O N ]
110.00		36.67			[ O N ]	[OFF]								[ON]								[ O FF]
133.00		33.33			[OFF]	[OFF]								[OFF]								[OFF]

WARNING! Frequencies other than the recommended CPU bus frequencies are not guaranteed to be stable. Overclocking your processor is not recommended. It may result in a slower speed and premature wearing of the processor.

NOTE: For updated processor settings, visit the ASUS web site: www.asus.com (see ASUS CONTACT INFORMATION).

18 ASUS A7VL-VM User’s Manual