Asus A7VL-VM JEN, OFF, Jumper Setting, 4.4 Advanced Menu, 1) Jumper Setting (JEN), ASUS A7VL-VMUser’s Manual, Motherboard Features Settings (DIP Switches - SW1)

3. HARDWARE SETUP

Motherboard Features Settings (DIP Switches - SW1)

The motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the switches in the OFF position.

	DSW
		4
		3
	ON	1 2
		ON OFF
	1. Frequency Selection
	2. Frequency Selection
A7VL-VM	3. Frequency Selection
	4. Frequency Selection
A7VL-VM DIP Switches

1) Jumper Setting (JEN)

This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu).

Jumper Setting	JEN
JumperFree™	[2-3] (default)
Jumper Mode	[1-2]

In JumperFree™ mode, DIP switches (SW1) must be set as shown: (ON: 1,2,4; OFF: 3)

DSW (Default)

			4
			3
		ON	1 2
		100MHz
	JEN
1	2	2	3
A7VL-VM
Jumper Mode		JumperFree
		(Default)

A7VL-VM JumperFree™ Mode Setting

Motherboard Settings

3. H/W SETUP

ASUS A7VL-VM User’s Manual 17