Asus A8N-SLI SE PCI PnP, Plug & Play O/S No, Resources Controlled By Auto, Init Display First PCI

4.4.2PCI PnP

Phoenix-Award BIOS CMOS Setup Utility

Advanced

Frequency/Voltage control		Select Menu
Plug & Play O/S	[No]	Item Specific Help
Init Display First	[PCI]
Resources Controlled By	[Auto]	Select Yes if you are
		using a Plug and Play
x IRQ Resources
		capable operating system.
		Select No if you need the
		BIOS to configure non-boot
		devices.

F1:Help	↑↓ : Select Item	-/+: Change Value	F5: Setup	Defaults
ESC: Exit	→←: Select Menu	Enter: Select Sub-menu	F10: Save	and Exit

Plug & Play O/S [No]

When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes]

Resources Controlled By [Auto]

When set to [Auto], the BIOS automatically configures all the boot and Plug and Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and memory base address fields.

Configuration options: [Auto] [Manual]

Init Display First [PCI]

Allows you to select which graphics controller to use as the primary boot device. Configuration options: [PCI] [PCI-E]

When the item Resources Controlled By is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section “IRQ Resources” for information on how to enable this item.

ASUS A8N-SLI SE 4-23