Asus A8N-SLI SE manual Dram Configuration, Sets the timing mode. Configuration options Auto Manual

DRAM Configuration

The items in this sub-menu show the DRAM-related information auto-detected by the BIOS.

Phoenix-Award BIOS CMOS Setup Utility

Advanced

			DRAM Configuration		Select Menu
	Timing Mode			[Auto]	Item Specific Help
x Memclock index value (Mhz)				400Mhz
x	CAS# latency (Tcl)			3	<Enter> to select DARM
x Min RAS# active time(Tras)				8T	configuration by
x	RAS# to CAS# delay		(Trcd)	3T	Auto] is recommended.
x	Row precharge Time		(Trp)	3T	[Manual] allows you to
x	Row cycle time		(Trc)	11T	set each
x Row refresh cycle time (Trfc)				14T	configuration on your
x Read-to-Write time (Trwt)				5T	own.
x Write Recovery time (Twr)				3T
x	1T/2T Memory Timing			2T
	S/W DRAM Over 4G Remapping			[Enabled}
	H/W DRAM Over 4G Remapping			[Enabled}
F1:Help		↑↓ : Select Item		-/+: Change Value	F5: Setup Defaults
ESC: Exit		→←: Select Menu		Enter: Select Sub-menu	F10: Save and Exit

Timing Mode [Auto]

Sets the timing mode. Configuration options: [Auto] [Manual]

Memclock index value (Mhz)

Shows the memory clock index value. This item is not configurable.

CAS# latency (Tcl)

Shows the CAS# latency. This item is not configurable. Min RAS# active time (Tras)

Shows the minimum RAS# active time. This item is not configurable.

RAS# to CAS# delay (Trcd)

Shows the RAS# to CAS# delay to Rd/Wr command on the same bank. This item is not configurable.

ASUS A8N-SLI SE 4-21