Asus A8N-SLI SE Hardware Monitor, Fan2 Controller Disabled, CPU Temperature, M/B Temperature

4.5.4Hardware Monitor

The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press <Enter> to display the configuration options.

Phoenix-Award BIOS CMOS Setup Utility

Power

	Hardware Monitor				Select Menu
Q-Fan2 Controller		[Disabled]			Item Specific Help
Vcore Voltage		[	1.50V]
3.3V Voltage		[	3.31V]		Press [Enter] to
5V Voltage		[	4.94V]
					enable or disable
12V Voltage		[	11.26V]
CPU Temperature				48ºC
M/B Temperature				38ºC
CPU FAN Speed		4962		RPM
CHA1 FAN Speed			0	RPM
CHIP FAN Speed		5443		RPM
x CPU Target Temperature		20ºC
CPU Fan Speed warning		[1600		RPM]
CHA1 Fan Speed Warning		[Disabled]
CHIP Fan Speed warning		[Enabled]
F1:Help	↑↓ : Select Item	-/+: Change Value			F5: Setup Defaults
ESC: Exit	→←: Select Menu	Enter: Select Sub-menu			F10: Save and Exit

Q-Fan2 Controller [Disabled]

Allows you to enable or disable the Q-Fan2 controller.

Configuration options: [Disabled] [Enabled]

VCORE Voltage, +12V Voltage, 3.3V Voltage, 5VCC Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. These items are not user-configurable.

CPU Temperature, M/B Temperature

The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable.

CPU Fan Speed

CHA1 Fan Speed

CHIP Fan Speed

The onboard hardware monitor automatically detects and displays the Chassis, CPU, and Chip fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows 0. These items are not user-configurable.

ASUS A8N SLI SE 4-37