Asus AP130-E1 Layout Contents, Page, Slots, Jumpers, Internal connectors, Rear panel connectors

2.2.4	Layout Contents
Slots		Page
1.	DDR DIMM	2-11
2.	PCI	2-16
Jumpers
1.	Keyboard power (3-pin KBPWR)	2-17
2.	RAID enable (3-pin RAID_EN)	2-17
3.	Clear RTC RAM (3-pin CLRTC)	2-18
Rear panel connectors
1.	PS/2 mouse port	2-19
2.	Parallel port	2-19
3.	PS/2 keyboard port	2-19
4.	USB 2.0 ports 1 and 2	2-19
5.	Serial port	2-19
6.	Video port	2-19
7.	RJ-45 port	2-19
Internal connectors
1.	Floppy disk drive connector (34-1 pin FLOPPY)	2-20
2.	SMBus connector (6-1 pin EXTSMB1)	2-20
3.	IDE connectors (40-1 pin PRI_IDE, SEC_IDE)	2-21
4.	Serial ATA connectors (7-pin SATA-IDE3, SATA-IDE4)	2-22
5.	Serial ATA RAID connectors
	(7-pin R-SATA1, R-SATA2, R-SATA3, R-SATA4)	2-22
6.	Chassis intrusion connector (4-1 pin CHASS1)	2-23
7.	Power supply thermal connector (2-pin THERMAL_AUX)	2-23
8.	CPU, System, and Auxiliary fan connectors
	(3-pin CPU-FAN, SYSTEM-FAN, AUX-FAN)	2-24
9.	Serial port 2 connector (10-2 pin COM2)	2-24
10.	ATX power connectors (20-pin ATXPWR, 4-pin ATX12V)	2-25
11.	USB header (10-1 pin USB34)	2-26
12.	System panel connector (20-pin PANEL)	2-26
	- System power LED (3-1 pin PLED)
	- Messagge LED (2-pin MLED)
	- System warning speaker (4-pin SPEAKER)
	- Hard disk activity LED (2-pin HD_LED)
	- System management interrupt (2-pin SMI)
	- ATX power switch/Soft-off switch (2-pin PWRSW)
	- Reset switch (2-pin RESET)

2-4 Chapter 2: Hardware information